Thru-Hull Fittings

About Thru-Hull Fittings

Thru Hull Fittings & Tools

Defender Marine offers a full line of thru hull fittings fabricated in a variety of materials. From ½ inch up to 5 inches, our boat thru hulls are the key to successfully rigging any type of intake/discharge pump above or below the waterline. Washdowns, circulating pumps and even saltwater cooled engines depend on the correct size boat thru hull, strainer, valve, and reinforced hose system. Strainers in several shapes, as well as tools to facilitate thru hull installation, are also available at Defender Marine.

What's the best way to install a marine thru hull fitting?

Remember that old adage - slow and steady wins the race? Well, there is no location on a boat to be more careful and slower than installing thru hulls below the waterline. First things first - haul your boat and let it settle, especially if it has a wooden hull. Next, get all of your details straight before you dig out that hole saw! Match pipe thread, determine if your job needs a seacock, fabricate and fit a backing plate and confirm that your metals are compatible to avoid electrolysis. Finally, make certain that all adhesives and sealants have cured prior to going back to the water!

The trials and tribulations of boat thru hulls and strainers.

Isn't it great when an overheated pump turns out to be a clogged or blocked strainer instead of an issue that requires a mechanic and all of his tools? Marine thru hull systems offers several layers of protection for your intake and the expensive mechanical equipment beyond. Strainers and thru hulls with strainer systems from Defender come in several shapes sizes and keep large debris from entering through the hull.

This thru hull fitting is made of what?

Defender offers thru hull fittings made of just about anything. There are several items to consider when choosing your boat thru hull. The most important is the strength of your fitting; in some applications, a seacock or backing plate may strengthen your project. The next is electrolysis. When it comes to boats, electrolysis is part of life, but boat thru hull fittings are normally located under the waterline where metals react more severely. Be certain metals are compatible or use plastic or Marelon thru hull fittings - these are guaranteed not to pit!

Thru-Hull Fittings

Apollo Conbraco 65-Series Bronze Thru-Hull Flanged Retainer Nut

Perko Broad Flange Thru-Hull Connector

Whitecap Straight Thru-Hull with Barb

Groco TH Series Thru-Hull Lock Nut

Whitecap Thru-Hull with Barb - 90 deg.

Seachoice Thru-Hull Connector with Broad Flange

Sea-Dog Thru-Hull

Attwood Plastic Mushroom Head Thru-Hull Fitting

T-H Marine Straight Thru-Hull Fittings

Perko Narrow Flange Thru-Hull Hose Connector

T-H Marine Thru-Hull Fittings - 3/4" - 90 deg.

Attwood Plastic Thru-Hull Fitting - 90 deg.

Whitecap Plastic Mushroom Head Thru-Hull Fitting with SS Flange

Forespar Pro Series Buttress Thread Thru-Hull Connector

Forespar MF 866 Scoop Strainer Screen - 1 1/4" - 906062

Seachoice Thru-Hull Connector with One Nut Application - 90 deg.

Seachoice Extra Long Thru-Hull Connector

Forespar CF 249 BSP Thread Thru-Hull Nut - 2" - 920383

Seachoice Thru-Hull Connector with Two Nut Application - 90 deg.

Forespar CF 249 Thru-Hull Nut

Seachoice Thru-Hull Connector

Seachoice Stainless Steel Covered Thru-Hull Fitting

Vetus Delrin Thru-Hull Fitting

Seachoice Thru-Hull Strainer Mount - 18191

Seachoice Cable Thru-Hull Fitting

Rule Acetal Resin Mushroom Head Thru-Hull Fitting - 61

Rule Acetal Resin Mushroom Head Thru-Hull Fitting - 1 1/8" - 60

Forespar CF 250 Marelon Flush Head Threaded Thru-Hull Connector

Attwood Thru-Hull Fitting with Strainer - 3886-3

Forespar 253 Series Marelon Mushroom Head Thru-Hull Fitting

Groco Combo Thru-Hull Fitting with Nut

Forespar CF 251 Marelon Mushroom Head Threaded Thru-Hull Connector

Forespar CF 254S Marelon Flush Head Deck Drain/Thru Hull with Screen

Forespar CF 253 Marelon Mushroom Head Screened Thru-Hull Barb Connector

Groco HTH Series Hose Barb Thru-Hull Fitting

Groco HSTH Series Combo High Speed Pickup Thru-Hull Fitting with Nut

Groco FTH Series Bronze Flush Mount Thru-Hull Fitting

Attwood Stainless Steel Barbed Thru-Hull Fitting

Vetus Stainless Steel Water Scoop

Groco Bronze Scoop Thru-Hull Strainer with Nut

Forespar CF 254 Marelon Flush Head Thru-Hull Barb Connector

Whitecap Nylon Thru Hull with SS Flange Cover - S-3813

Groco Combo HSTHXL Series High Speed XL Pickup Thru-Hull Fitting with Nut

Perko Thru-Hull Hose Connector

Forespar Scoop Strainer

Groco SC Series Bronze Clam Shell Style Hull Strainer

Whitecap Duraplex Stainless Steel Thru-Hull

Groco Combo XL Thru-Hull

About Thru-Hull Fittings

Thru Hull Fittings & Tools

What's the best way to install a marine thru hull fitting?

The trials and tribulations of boat thru hulls and strainers.

This thru hull fitting is made of what?

0Filters

Change Locale

Helpful Information

Get In Touch

Resources

Stay Connected