Hose & Pipe Fittings

About Hose & Pipe Fittings

Boat Hose Fittings

Boat plumbing fittings cover a wide variety of applications aboard. From thru hulls to raw water strainers, boat sink drains and vented loops, marine water pipe fittings options are extensive. Fabricated of bronze, plastic, marelon, and stainless steel the choices of fittings means doing your homework and purchasing just the right fitting for your project.

What is the best material for marine plumbing fittings?

Boat pipe fittings are available in bronze, brass, marelon, nylon, stainless and heavy-duty plastic. The best material is most likely one that matches your current plumbing, especially when joining fittings together. Complete removal and replacement of marine plumbing fittings offer the option to upgrade to higher quality material. Keep in mind that heavy bronze fittings may add unwanted weight to your vessel and depending on the application might not be necessary.

Marine plumbing is a pretty complicated business.

In through the hull, out through the transom. Loops, Y-valves, strainers, and exactly when do you need to add a seacock? Defender carries a full line of every fitting for every project, but perhaps a quick-connect fitting system would provide an uncomplicated weekend project for the average DIYer. One thing is for certain before any marine plumbing project begins, double-check the hose fittings required and have them all on hand and ready to go!

Marine hose fittings come in all shapes and sizes.

Marine hose fittings are available in 90-degree and 45-degree elbows, nipples, and couplers join different pipes together while end caps do just that, end the pipe. Tank fitting kits are available for full removal and replacement of all plumbing coming in and out of the water and holding tanks. Seacocks, thru hulls, strainers, and raw water manifolds are a bit more complicated while pipe to hose fittings and marine pipe reducers are pretty straightforward. Double-check your application and fitting shapes and sizes then get shopping at Defender Marine!

Hose & Pipe Fittings

Forespar Vented Loop

Forespar HECM Series Marelon Elbow Tailpipe/Hose Connector - 90 deg.

Forespar CF 252 Series Marelon Tailpipe/Adaptor

Forespar MTC Series Marelon Threaded Reducer/Adapter

Forespar HECF Marelon Elbow Tailpipe/Hose Connector - 90 deg.

Forespar MF-841 Replacement Duck Bill/Cap Assembly

Forespar Marelon Tailpipe/Hose Connector

PSS PYI Hose Clamp Tip Jackets

SHURflo Hose Barb Wingnut Fitting - 90 deg.

SHURflo Hose Barb Wingnut Fitting

Forespar FTC Series Marelon Straight Threaded Connector

Forespar Marelon Threaded Reducer/Adapter

Forespar MEC 12 Marelon Elbow Threaded Connector - 90 deg. - 920336

Forespar MF 846 Vent Barb Assembly - 903004

PSS PYI T-Bolt Clamp Tip Jackets (25-Pack) - CJT14.25

SHURflo Switch Assembly - 55 PSI - 94-800-05

SHURflo Straight Fitting Port Adapter - 1/2" - 14 NPT(F) x 3/4" Barb - 94-181-03

SHURflo Wing Nut Port Adapter

SHURflo Hex/Wingnut Straight Fitting - 1/2" Barb x 1/2" NPT-F - 94-181-04

SHURflo Wing Nut Swivel - 1/2" FPT x 1/2" - 94-181-12

SHURflo Blaster Nozzle Only - 94-010-00

SHURflo Straight Fitting Wingnut Swivel - 1/2" - 14 NPT(F) x 5/8" Barb - 94-181-02

Forespar MEC 8 Marelon Elbow Threaded Connector - 90 deg. - 920207

SHURflo Pressure Reducing City Water Entry - 183-039-08

About Hose & Pipe Fittings

Boat Hose Fittings

What is the best material for marine plumbing fittings?

Marine plumbing is a pretty complicated business.

Marine hose fittings come in all shapes and sizes.

3Filters

Change Locale

Helpful Information

Get In Touch

Resources

Stay Connected