Katadyn PowerSurvivor 40E Watermaker - 8013438

Features:

• Katadyn PowerSurvivor 40E is the world's smallest electrical desalinator and the PowerSurvivor 40E is the only power watermaker that converts to manual operation in emergencies
  • Special Manual Feature:
    • The PowerSurvivor 40E is the only power watermaker that converts to manual operation in case of a power loss
    • Its capability for manual operation is useful when normal ship's power is unavailable
    • Note: The PowerSurvivor 40E watermaker was never intended to be part of a vessel's "Abandon Ship" equipment
• Simplicity : The 40E contains 40% fewer parts than its popular predecessor, the PowerSurvivor 35
  • Simplified construction and rugged design make the 40E remarkably easy to install, operate and maintain
• Compactness: Extraordinarily compact, the 40E can be installed in the nooks and crannies otherwise unusable in many yachts
• Efficiency: No watermaker draws so few amps.Using only 4 amps, the 40E can run for extended periods on alternative power alone
• Durability:The heart of the 40E is the rugged stainless high-pressure pump. Armed for the rigors of the marine environment, this watermaker is built to last. We're so certain, we've covered it with a superior warranty: 3 years on most components

Specifications:

• Technology: Reverse Osmosis
• Output (+/- 15%): 1.50 gallons per hour (5.70 l/h )
• Salt rejection (avarage): 98.4% (min. 96%)
• Power requirements: 12V DC / 4 amps
• Dimensions: 16.34" x 15.37" x 6.71" (41.5 x 39.0 x 17.04 cm)

Katadyn Desalinators are built to rigorous specifications and designed to produce potable freshwater from clean seawater using minimal power

• It is simple to install and operate and, with reasonable care and maintenance, can be expected to provide years of useful service
• Silt or Sand can damage the membrane and internal pump components if not removed during pre-filtration
  • If you must regularly process such water, consider installing a Silt Reduction Kit
  • Foul Intake Seawater can seriously affect the quality of the product freshwater
  • The watermaker membrane is designed to remove the impurities found in clean, open ocean seawater
  • Processing of seawater with other kinds of impurities may not remove those impurities and may damage or destroy the membrane
• See Maintenance and Service: Pre-filter Maintenance in the owner's manual for information on typical problems associated with foul water intake
• Customer-supplied Equipment:
  • Every installation represents a unique challenge
  • You or your installer will have to provide:
    • A reliable source of clean seawater for input to the prefilter 3-way valve
    • Plumbing to an appropriate drain location for the reject brine water
    • A plumbing solution for your freshwater collection tank

Data Sheet

Owner's Manual