KoolAir PM500 Submersible Magdrive Pump

Features:

• The KoolAir PM 500 is magnetically driven pump, with no shaft seal
• The pump is epoxy encapsulated, which allows the PM pump to run fully submerged in many liquids or in open air for complete moisture protection
• When re-assembling the pump for service, make sure all "O" Rings are properly seated
• The pump is not self - priming and requires a suction
• The pump features run-dry and thermal overload protection
• This pump impeller features a hardened Carbon Interior bushing which allows for extended run-dry time without damaging the pump head
• In a run dry situation the pump thermal overload protection will shut the pump down if it exceeds a safe temperature
• Simply let it cool down or hose it down to assist in the cooling

Specifications:

• Single Phase
• All cords are 6 feet in length and are U.L. LISTED 18/3 wire
• The motors are rated as continuous duty
• Max Flow: 8.5 GPM
• Max Head: 19 feet (8.2 PSI)
• Inlet: 3/4" FPT
• Outlet: 1/2" MPT
• Dimensions: 4.87" (12.3 cm) H x 4.80 (12.2 cm) W x 7.50" (19.0 cm) L
• Includes Marine Base Adapter
  • Mounting Holes for Base: 4.37" x 3.14" on Center
• 2 Year Warranty: Koolair Pumps are guaranteed only against defects in workmanship or materials for a period of two years from date of manufacture while pumping water

Data Sheet