Webasto Air Top Evo 55 Diesel Marine Heater Kit

The Webasto Air Top Evo 55 Diesel Heater is the smart multi-mode heater complete with installation kit. Designed for boats with one main cabin, the Air Top Diesel Heater offers excellent heat output and quiet operation, so you can find your comfort when out on the water. This heater comes with the SmarTemp Control 3.0 Bluetooth.

Features:

• High-output, compact and quiet - ideally suited for the most rigorous requirements
• 5.5 kW power for fast heating
• Very low electrical power consumption due to new Intelligent Blower Control
• Improved flame detection through exhaust gas temperature sensor
• Automatic cold start function for quick warm-up
• Improved air intake silencer
• Vibration dampers for fuel line
• Very silent operation due to lower blower speed and silent fuel pump (DP42)
• In a sailboat each cabin and head compartment has its own air outlet
  • One outlet should be non-closable
  • The temperature sensor as well as the main air outlet is in the salon
  • The fresh air is taken in via the rear locker from outside
• In powerboats, the heater is usually placed in the engine compartment
  • The fresh air has to be taken in from outside the engine room
  • Special attention needs to be paid to a fire-resistant fuel supply system
  • One of the outlets should be non-closable

SmarTemp Control 3.0 Bluetooth:

• Bluetooth connection to the Webasto SmarTemp 3.0 App
• Adjustable LCD backlight
• Control, change settings, access TechWebasto.com and diagnose the heater via Webasto SmarTemp 3.0 App
• Downloadable users settings to the Webasto SmarTemp 3.0 App. File can then be used to prog multiple SmarTemp Control 3.0 Bluetooth units via the Webasto SmarTemp 3.0 App

Specifications:

• EC approval mark ECE R122 (Heating): E1 122R-00 0386
• EC approval mark ECE R10 (EMC): E1 10R-05 5529
• Heating power (kW): 1.5 5.0 (5.5 )
• Heating power (BTU/h): 5,100 17,000 (18,800
• Fuel Consumption (l/h): Diesel, 0.18 0.61 (0.67)
• Fuel Consumption (gal/h): Diesel, 0.04 0.15 (0.17)
• Rated voltage (V): 12V DC
• Rated power consumption (W): 15 95 (130)
• Rated current at 12V: (A) 1.3 7.9 (10.8)
• Air Flow against 0.5 mbar (m 3 /h): max. 200 (220)
• Air Flow against 0.5 mbar (cfm): 117.7 (129.4)
• Dimensions L xx(mm): 423 x 148 x 162
• Dimensions L xx(inch): 16.6 x 5.8 x 6.3
• Diameter air outlet (mm): 90
• Diameter air outlet (inch): 3.54
• Diameter exhaust (mm): 24
• Diameter exhaust (inch): 0.94
• Weight (kg): 5.9
• Weight (lbs): 13

Included:

• SmarTemp Control 3.0 Bluetooth
• Bag heater mounting parts
• Intake exhaust
• Bag duct clamps
• Heat protection sleeving, 2.5 m
• Bag electrical parts
• Air-outlet D60 closeable
• Exhaust through hull
• Union nut for air outlet D90
• Branch piece 90/60/90, 45 deg.
• Air outlet D90, 45 deg.
• Union nut for air outlet D60
• Air outlet D90, 90 deg.
• Wire harness AT40-55EVO - Marine SMPT-3-BT
• Tube flex pak, 90 mm x 1.5 m
• Tube flex pak, 60 mm x 2 m
• Tube flex pak, 25 mm x 2 m
• Marine bracket AT200ST EVO 40, 55
• Standpipe, 4.76 x 838 mm, 3/16" comp fitting
• Copper fuel line, 0.1875" x 25'
• SS flex tube without end cap, 24 mm x 2 m
• Marine water trap exhaust, 24 mm
• Flex pak tube
• Literature pack
• Gasket 89291
• Grid 89141
• Fuel pump enclosure assy DP42 - no damper
• Bag of marine fuel system parts

SmarTemp 3.0 Bluetooth Info

Heater Spec Sheet

Product Brochure (2.04 MB)